| Sylglas Anti-Slip Discs | Related Items
|
|||||||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||
We all know how slippery it can be in the shower or when stepping out of the bath, it doesn't have to be with Anti-Slip Discs specifically produced to prevent slips. |
||||||||||||||||||||||
Ideal for: |
||||||||||||||||||||||
| How To ......
|
||||||||||||||||||||||
Cut individual Discs off the roll, leave the release paper intact, once you are satisfied with their location follow the instructions below. |
||||||||||||||||||||||
![]() Anti-Slip Discs (white) applied to bathroom tiles ![]() Anti-Slip Strips (white) applied to bathroom tiles |
1. Peel back the release paper and firmly press the adhesive side of the discs onto the prepared surface. |
|||||||||||||||||||||
| 2. Ensuring not to contaminate the adhesive surface with dust or finger marks during this process. | ||||||||||||||||||||||
| 3. Do not stretch or tension the discs, press down firmly using even pressure, a hand roller may be used for this purpose. | ||||||||||||||||||||||
| The discs can be used immediately and will be fully bonded after 48 hours. | ||||||||||||||||||||||
![]() |
Contrast or blends in |
|||||||||||||||||||||
Stops potential bare foot slips in wet areas |
||||||||||||||||||||||
50mm dia. discs in white or clear |
Embossed PVC waterproof non-slip disc surface | |||||||||||||||||||||
N.B. Sylglas Anti-Slip Products are not suitable for industrial applications or continuous immersion and cannot be over-painted. To ensure continued anti-slip effectiveness, periodic inspections should be carried out and new strips re-applied in the event of wear/damage or the items have disbonded or been affected by day to day use and service conditions. Please note Winn & Coales (Denso) Ltd accepts no responsibility whatsoever for any accidents or injuries that could still occur where Sylglas Anti-Slip Products has been applied. |
||||||||||||||||||||||