| Sylglas Anti-Slip Strips | Related Items
|
|||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
We all know how slippery it can be in the shower or when stepping out of the bath, it doesn't have to be with Anti-Slip Strips specifically produced to prevent slips. |
||||||||||||||||||||||||||||||||||||
Ideal for: |
||||||||||||||||||||||||||||||||||||
| How To ......
|
||||||||||||||||||||||||||||||||||||
Cut individual Strips off the roll, leave the release paper intact, once you are satisfied with their location follow the instructions below. |
||||||||||||||||||||||||||||||||||||
![]() Anti-Slip Discs (white) applied to bathroom tiles ![]() Anti-Slip Strips (white) applied to bathroom tiles |
1. Peel back the release paper and firmly press the adhesive side of the strips onto the prepared surface. |
|||||||||||||||||||||||||||||||||||
| 2. Ensuring not to contaminate the adhesive surface with dust or finger marks during this process. | ||||||||||||||||||||||||||||||||||||
| 3. Do not stretch or tension the strips, press down firmly using even pressure, a hand roller may be used for this purpose. | ||||||||||||||||||||||||||||||||||||
| The strips can be used immediately and will be fully bonded after 48 hours. | ||||||||||||||||||||||||||||||||||||
![]() |
Contrast or blend in variations available |
|||||||||||||||||||||||||||||||||||
Stops potential bare foot slips in wet areas |
||||||||||||||||||||||||||||||||||||
50mm dia discs in white or clear |
Embossed PVC waterproof non-slip strips surface | |||||||||||||||||||||||||||||||||||
N.B. Sylglas Anti-Slip Products are not suitable for industrial applications or continuous immersion and cannot be over-painted.To ensure continued anti-slip effectiveness, periodic inspections should be carried out and new strips re-applied in the event of wear/damage or the items have disbonded or been affected by day to day use and service conditions. Please note Winn & Coales (Denso) Ltd accepts no responsibility whatsoever for any accidents or injuries that could still occur where Sylglas Anti-Slip Products has been applied. |
||||||||||||||||||||||||||||||||||||